The most common causes of septic system problems includes clogging and blockages from solids, obstructions from tree roots, broken pipelines or an obstruction within the septic pipes.
The most frequent cause of in-pipe obstruction results from excessive quantities of wastewater flushing sludge out of the tank and into the distribution pipes. The major cause of septic system failure is the natural aging process and the development of the biomat. The natural aging process can be reversed with controlled aeration of the septic tank. By keeping an eye on several telltale signs, a homeowner can proactively delay the impending failure.
The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water. If any of these symptoms exist, check for more pronounced indications of a septic system failure.
Check the absorption field for unusually strong odors. Other failure risks include tanks that are inaccessible for maintenance, drainfields that are paved or parked on, and tree roots or defective components that interfere with the treatment process.
The greatest prevention for system failure is to have your septic system inspected and pumped regularly. There are several obvious symptoms of septic system failures.
These symptoms include pooling water or muddy soil around your septic system, sinks or toilets backing up when used, and bright green grass over the drainfield. If you notice one or more of these symptoms, you should have your septic system inspected by a professional. Using the sink or bathtub to clean out paint rollers or flush toxic cleaners will damage your septic system. Oil-based paints, solvents, and large volumes of toxic cleaners should not enter your septic system.
Even the introduction of latex paint should be minimized by removing all excess paint and stain from brushes and rollers before rinsing. It's important to remember that your septic system contains a living organisms that digest and treat waste.
Of course, some cleaning products are less toxic to your system than others. As a general rule, the best practice is to not use excessive amounts of cleaning agent and minimize the amount discharged into your septic system.
Although hot tubs are wonderful for relaxing, they can wreak havoc on a septic system. Septic systems are not designed to handle large quantities of water in a short time. Draining a hot tub into your septic system stirs the solids in the tank and pushes them out into the drainfield, causing it to clog and fail.
Instead of draining your hot tub directly into you septic system or onto the drainfield, it best to drain cooled hot tub water onto turf or landscaped areas well away from the septic tank and drainfield. Eliminating the use of a garbage disposal can reduce the amount of grease and solids entering the septic tank and possibly clogging the drainfield.
A garbage disposal sends ground up kitchen scraps directly into the septic tank. Once in the septic tank, most of the grindings have to be pumped out of the tank because they are not broken down by bacteria.
This can lead to clogging and malfunction of the drainfield. Using a garbage disposal frequently can significantly increase the accumulation of sludge and scum in your septic tank, resulting in the need for more frequent pumping. Follow Us. Get the latest news delivered to your inbox. Thank you for contacting us. We will get back to you as soon as possible.
Oops, there was an error sending your message. Please try again later. Request Service. Call us Oct 15, Important signs and symptoms that your septic system might be failing. Failure symptoms There are several obvious symptoms of septic system failures. Common Causes of Failure Household Toxics Using the sink or bathtub to clean out paint rollers or flush toxic cleaners will damage your septic system.
Hot Tubs Although hot tubs are wonderful for relaxing, they can wreak havoc on a septic system. Garbage Disposals Eliminating the use of a garbage disposal can reduce the amount of grease and solids entering the septic tank and possibly clogging the drainfield.
You might also like Tank Talk. When your septic system stops working properly, all the wastewater in your home has nowhere to go. That means it comes back to you—untreated and unsafe. Septic tank failure is a very serious and often very expensive problem. You never want to deal with it—trust us.
These are the four primary reasons why septic tanks fail, and how you can avoid them. Your septic system works by transferring all the wastewater you produce into the septic tank. Inside the tank, heavy contaminants separate from the water and settle on the bottom as sludge.
Light pollutants like oil and grease float to the surface of the wastewater as scum. The septic tank only pumps the water into the drainfield after the sludge and scum separate out. Some of the sludge and scum inside the tank breaks down naturally over time, but not all of it.
You need to pump your septic tank out at least once every 3 years to remove built-up sludge and scum. The main disadvantage of septic tanks are their limited capacity. A septic tank can only manage to process a certain quantity of wastewater at a time. Usually, your septic tank should discharge wastewater at the same rate as or faster than it takes on water.
0コメント